LIST
Home » Products » Agro Nutrients » AMINOFERT-MOLYBDENUM (MOLYBDENUM AMINO ACID CHELATE - Mo 2%)

AMINOFERT-MOLYBDENUM (MOLYBDENUM AMINO ACID CHELATE - Mo 2%)

‘Aminofert-Molybdenum’ Molybdenum Amino Acid Chelated Powder is prepared for foliar application on plants to prevent or correct nutrient deficiency that may limit crop growth and yield. It is non-toxic to plants when applied.  For best results, apply Aminofert- Molybdenum soluble powder as per recommendation based on plant tissue or soil analysis. It is approved for organic production.

Aminofert- Molybdenum (Molybdenum Amino Acid Chelated Powder) contains 2% as calcium and 50% amino acids (as protein hydrolysed).

Aminofert- Molybdenum (Molybdenum Amino Acid Chelated Powder) is off white to light yellow colour free flowing powder, soluble in water and clear solution.

 

Deficiency Symptoms

·         Molybdenum deficiency resembles nitrogen deficiency.

·         In dicotyledons a drastic reduction in size and irregularities in leaf blade formation (whiptail) are the most typical visual symptoms.

·         Stunted growth rate.

·         Leaves become pale and eventually wither.

·         Fired margin and deformation of leaves due to excess NO3.

·         Insufficient differentiation of vascular bundles at early stages of leaf development.

·         Destruction of embryonic tissue.

·         Poor grain or fruit set, due to less viable pollen


Standard Specification

PHYSICAL PARAMETERS

S.L. No.

PRODUCT PARAMETERS

SPECIFICATION

1.

Appearance

Off white to creamish color free flowing powder.

2.

Solubility (2% soln.)

Completely soluble in water.

 
CHEMICAL PARAMETERS

S.L. No.

PRODUCT PARAMETERS

SPECIFICATION

1.

pH (2% soln. at 25oC)

7.0 – 9.0

2.

Molybdenum Content (Mo)

NLT-2.0%

3.

Total Nitrogen Content

NLT-8.0%

4.

Amino acid Contents

NLT-50.0%

5.

Loss On Drying (at 105oC)

NMT-10.0%


Benefits

·         Molybdenum functions in converting nitrates (NO3) into amino acids within the plant.

·         Molybdenum is essential to the symbiotic nitrogen fixing bacteria in legumes.

·         Molybdenum is important in pollination formation.

·         Molybdenum is involved in formation of fruit and grain.

·         Molybdenum is necessary for nitrogen metabolism and protein formation.

·         Molybdenum is essential for the conversion of inorganic Phosphorous into organic forms in the plant.

 

Directions

Apply Aminofert-Molybdenum by a spray method with an adequate amount of water that will provide complete coverage of the plants. Use of a non-ionic wetting agent may improve spray coverage of certain hard to wet plants.

Aminofert-Molybdenum soluble powder can be included in a regular spray on crops compatible with other spray material.

The rate of application will depend on the crops, stage of growth, and severity of deficiency. The maximum recommended rates are for mature, full-sized plants; reduce the rates proportionately when spraying smaller plants.

Aminofert-Molybdenum soluble powder may be used on legumes, grain crops, root crops, cucurbits, cole crops, leafy vegetables, woody and herbaceous ornamentals, deciduous fruits, tropical and subtropical fruits, and many other crops. 

Dosage

Field Crops & Vegetables

Apply Aminofert- Molybdenum 200 to 400 gm per acre during periods of rapid growth or nutritional stress. The application may be repeated twice or more times through the growth season. 

Tree Crops

Make an application of Aminofert- Molybdenum 400 to 800 gm per acre after the beginning of active growth. The application may be repeated at 2 to 4 weeks intervals through the growth season.

Grapes & Berries

Make an application of Aminofert- Molybdenum 200 to 400 gm per acre after active growth begins. The application may be repeated at intervals of one week or more through the vegetative growth period.

Instructions

Initially Soluble Powders will require special mixing attention. Like Soluble Powders have a tendency to clump when introduced to liquids. Because of this, take every step possible within the requirements to make these materials as user-friendly as possible.

Care should be taken to ensure that the materials are fully mixed and disposed throughout the spray tank. One way to assure proper dispersion is to place the required amount of powder into a bucket of water. After fully mixing, the product be added to the spray tank. You can then mix the next spray tank worth of powder in a bucket and let it hydrate while spraying the first load. This makes the mixing much easier.

Other methods of dispersal:

·         Use an inductor system.

·         Wash the product through the anti-splash screen on the top of the spray tank.

 

Shelf Life

36 Months.

STD. Packing

25 Kg Paper Bag. 

Storage

Store the material below 25oC, protect from direct sunlight.

 

 

 

 


 
Home
About Us
Product
Careers
Contact Us
Enquiry
Customer Care
Agar Agar Powder
Aminofert
Bile Salt Mixture
Brewer Yeast Protein
Calcium Caseinate
Calcium Propionate
Collagen Peptides
Dried Yeast (Inactive)
Protein Hydrolysate
Liver Extract
Meat Extract Powder
Mineral Chelated Amino Acids
Nutrivet
Ox Bile Powder
Peptone
Potassium Silicate
Protein Casitone
Sodium Caseinate
Whey Protein Hydrolysate
Yeast Extract
  © 2008-2015. Copyright, www.titanbiotechltd.com, All rights reserved.   Powered by www.IndiaInternets.com :: Website Design India     
twitter scribd plus.google